It’s June everybody. Which means cold mornings, wet job sites, and the final sprint to 30 June.
This month’s wrap covers some big news in electrical safety across the country, why nationally accredited courses are the only option now, and why you should be logging test results if you’re not already.
Whether you’re testing gear, managing a team, or running the show, here’s what matters this month.
Electrical Safety Laws Rolling Out in QLD
Queensland is tightening its electrical safety regulations, with staged updates rolling out throughout 2025 under the Electrical Safety and Other Legislation Amendment Regulation 2024 (ESOLA).
While they don’t specifically mention test and tag, the message is clear - regulators are cracking down on avoidable electrical risks.
- Power off before ceiling work – From January 1, 2025, you must isolate power before entering any domestic roof space.
- Pool pump safety – From April 1, 2025, water-related electrical gear (like pool pumps) will be reclassified as prescribed electrical equipment.
- Higher penalties – From July 1, 2025, new infringement notices (on-the-spot fines) apply for failing to meet roof space safety rules.
Why it matters: Even if you’re only testing in certain environments, these updates reflect a wider shift in expectations, and that's a major positive.
You can read more about the ESOLA regulation changes on the WorkSafe QLD website.
Construction Blitz Coming to NSW & QLD
Starting July 2025, both Queensland and New South Wales are stepping up construction site compliance with state-wide blitz targeting worksites across both states.
Inspectors will be out in force, checking for electrical safety, tool compliance, PPE use, plant safety, and more.
And here’s the kicker for anyone testing and tagging:
SafeWork NSW specifically listed test and tag compliance as a focus area during their ongoing inspections — alongside scaffolding, fall risks, site security and high-risk work controls.
Inspectors in NSW have already visited areas like Newcastle, Maitland and Port Stephens, issuing over 150 improvement and prohibition notices and handing out on-the-spot fines for unsafe practices. You can read the full SafeWork NSW announcement.
For QLD, the campaign is part of WHSQ’s broader compliance program through to 2027.
For NSW, this is a clear signal that test and tag compliance is being treated as a frontline safety issue, not just a box-ticking exercise.
Now’s the time to tighten up your site procedures, especially around documentation, test tagging, and equipment checks. Because fines are already being issued and inspectors aren’t turning a blind eye.
Data Logging Now Best Practice
A quiet but important change flew under the radar with the new AS/NZS 3760:2022 changes. Recording test results is now strongly recommended as best practice in Australia - and it’s officially required to be recorded and stored in New Zealand.
The previous version of the Standard was more broad on data logging - especially for lower-risk environments. But with the wording being adjusted, this change means it's highly advised to take data logging seriously.
Why it matters:
- If there’s ever an incident, having digital records can protect you from liability.
- Many businesses now ask to see your test data during audits or safety checks.
- Digital logs speed things up compared to handwritten records.
Nationally Recognised In, Non-Accredited Out
We’ve officially phased out our non-accredited Test & Tag Course because the industry has moved on for the better - and so have we.
Nationally recognised test and tag training is now the benchmark. It’s what insurers, auditors, and regulators expect. In some states (Queensland and Western Australia), it’s even the minimum requirement.
Non-accredited test and tag options might still float around under different names, but without a formal Statement of Attainment, they simply don’t stack up in the real world, especially if you're testing and tagging gear that will be used by the public. They won’t satisfy many industry requirements, and they won’t hold up in an audit.
That’s why we’ve chosen to focus exclusively on nationally recognised training for our core test and tag course - the same course rated Australia’s most trusted by students for five years running. Because when safety and compliance are on the line, cutting corners just isn't worth it.
EOFY Deals & Instant Write-Off Reminder
The $20,000 instant asset write-off ends June 30, and it's not expected to return in the same form.
If you're looking at test and tag equipment, this is your chance to load up, claim it this financial year and reduce your tax bill.
- Discounts on test tags, tag printers, accessories
- Freebies with selected test and tag kits
- Big savings on consumables
Load up before June 30, claim it this year, and lower your tax bill. See Appliance Testing Supplies for the latest EOFY deals.
Final Words
That’s a wrap for June.
New rules are rolling out, inspectors are on the move, and EOFY is right around the corner - so now’s a good time to get your house in order.
We’ll catch you in July with more updates. Until then, stay sharp, stay safe, and don’t forget to rotate those test tags.
